Motsenbocker’s Lift Off Acrylic Paint LATEX BASED PAINT Paint Remover

Motsenbocker’s Lift Off Acrylic Paint LATEX BASED PAINT Paint Remover

Mötsenböcker’s Lift Off #5 Acrylic Based Paint Remover is a unique formulation that is truly water–based and biodegradable. It was designed to specifically remove acrylic based paints from all surfaces including carpet, clothing, upholstery, brick, concrete and more! Lift Off #5 works great for all acrylic based paint clean up from tools to overspray.

Works on: New & Old Paint • Drips & Splatters • Wood Stains • Enamels • Oversprays • Acrylic Low, Semi & High–Gloss Paints • Acrylic Aerosols • Acrylic Enamels • Water–Based Sealers • Linseed Oils • Lacquer • Stencil Paints & More!

Features and benefits
Acrylic based paint remover
Green Cross certified
Low–VOC
Water–Based
Biodegradable
Safe for the environment and user

Safe on:
Carpeting • Fiberglass • Tools • Hands • Fabrics • Brick • Concrete • Upholstery • Spray Equipment • Brushes • Furniture • Non–washables • Floors • Washables • Linoleum • Tile • Counter–tops • Wood • Cars & More!

How to use
For clothes, upholstery & non–washables:
1. Test for colorfastness by spraying an inconspicuous area. 2. Blot/wipe wet paint spot thoroughly with a clean, white cloth or paper towel. 3. Spray paint spot thoroughly; wait at least 60 seconds. 4. Gently agitate (use brush if necessary) to loosen dried paint, then wipe or blot thoroughly with clean, white towel or cloth. Repeat if necessary. 5. For best results on non–washable materials, dry with hair dryer on medium heat.

For carpets:
Apply according to the instructions above. Then place a clean, white cloth or paper towels over the treated area, followed by something flat and heavy like a phonebook. In a few hours, the towel will absorb any excess stain dampness or residue from the stain.

For washables:
1. Spray paint spot thoroughly; wait at least 60 seconds. 2. Agitate if necessary (the back end of a tooth brush works well). Repeat if necessary. 3. Launder as fabric recommendations allow.

For floors, concrete, linoleum, brick, tile, counter–tops, and cars:
1. Spray paint spot thoroughly; wait at least 60 seconds. 2. Use brush or cloth to agitate (loosen) dried paint. 3. Wipe with clean towel, or if possible, rinse off. Repeat if necessary.
Be cautious with use on concrete, test on an inconspicuous area first.

CAUTION:
Always test on inconspicuous area first. Not recommended for use on latex painted walls, non-colorfast materials or woodwork.